Red, green, flashing: What does my shark vacuum light mean? | Digital trends

Think of this light as a health monitor for your shark vacuum. Of course, you don’t have to be a trained physician or vacuum repair professional to understand what these different lights mean, but if you notice that your shark vacuum is not working properly late, there is a good chance of LED lighting flashing or a certain color. Is going to be done.

Let’s unpack what all these different LED light colors mean and how to deal with any problems the indicator is pointing to.

A solid red light

Most of the time, a solid red light means there is something wrong with the main brush roll of your vacuum, meaning the brush is not rotating properly. In many cases, a stuck brush roll will not spin at all. The problem may occur because it is jammed with hair, loose strings, bits of plastic bags or any other kind of binding barrier.

To deal with these losing enemies, go ahead and unplug your shark vacuum from the power outlet you are connected to (if it is a corded model), then invert the vacuum to open the vacuum under the head. This may be necessary if you can manage to remove some of the string insects that have bound the brush roll with your fingers. Sometimes, though, it’s easy to cut or trim hair with a pair of scissors or a utility knife.

Once you delete the buildup, flip the vacuum again, reconnect to the power and give it a spin. If the LED is no longer red and your brush roll seems to be spinning normally, you have solved the problem.

A flashing red light

In many shark vacuums, the same red light may occasionally glow instead of staying strong. While this may be an indication that the brush roll is jammed, a flashing red light usually indicates that your shark vag is getting overheated. This problem is often caused by a compromised brush roll or some other type of obstruction in the vacuum.

An overheated vacuum motor is a major cause of burnout, so you’ll want to get things down quickly. Fortunately, shark vacuums have a temperature sensor that will automatically kill zero energy if the operating temperature gets too dirty.

Often, there will also be an extra hot vac Words Differently if your shark emits some stranded high frequency (the kind of noise that hits your ears), it has a better chance of getting stuck and getting in the way of excess heat.

Here’s how to fix it: Disconnect your Shark Vac from the wall outlet and give it about 30 minutes to an hour to cool down physically. After you give the wax the much-needed break, the first thing we recommend is to flip it over and check the brush roll for any hair or string. If all else fails, get ideas from others.

Disconnect all hoses and attachments to check for any buildup. Clean as needed, empty the dust tank and also check your vacuum filters. Once you have serviced all the parts, reconnect all the peripherals and reconnect the Shark Vack for power (if needed). If you blow it up and the flashing red light goes off, you’ve failed another problem.

Several sharks have LED headlights on the front of the vacuum head. These work lamps make it easy to see the dirt and dust hidden in the knocks and cranes of your home, but they also act as a secondary health indicator.

If your shark’s LED headlights flash, nine out of 10 times means your brush roll is stuck. Follow the steps above (under the “Solid Red Light” section) The brush roll should rotate once more.

Green means go, doesn’t it? Well, pretty.

If your shark’s LED indicator is illuminated in solid green, only the brush roll, motor and other vacuum components are working properly.

Editors’ recommendations