Cooler Master has launched the MasterBox Q300L V2, a new mATX case that has been redesigned compared to its predecessor. Air flow was optimized and the acrylic side panel was replaced with one made of glass. There are also other, smaller changes to the design.
The MasterBox Q300L came to the market in 2018 and is therefore already five years old. This is a rather cheap case that retails for around 40 euros. Now Cooler Master has come up with one the heir In the market, where some aspects have been changed. According to the manufacturer, for the MasterBox Q300L V2 About 65 euros to begin with, but there is no exact launch date yet.
Compared to its predecessor, for example, the I/O panel has been revised and expanded with a USB 3.2 Gen 2×2 Type-C connection up to 20 GB/s. There is still space up to the mainboard inside mATX-standard as well as for a fully developed ATX power supply with 160 mm. The CPU cooler can be up to 159mm high, while the graphics card can be up to 360mm tall. When delivered, a 120mm fan is already pre-installed, theoretically it could do this Up to six fans The assembled case measures 370 x 210 x 370 mm and has a volume of 29 liters.
The front, top and bottom are perforated to provide as much fresh air as possible. There is also a magnetic dust filter on the outside. Visually, the filters are much finer than their predecessors. There is one for that Tempered glass side panelThrough which the hardware can be seen.
formula
For better legibility, the simultaneous use of masculine, feminine and different language forms (m/f/d) is avoided. All personal titles apply equally to all genders.